کد کالا : SP-HRRT-102
ساخت : Sepahan Oil Co
اصالت کالا : original
مشخصات کلی : Sepahan Heat Oil
Sepahan Hararat oils are high performance products intended for use in closed indirect heating installations. They are formulated from highly refined base stocks that are resistant to thermal cracking and chemical oxidation. They have good heat transfer effciency and their viscosities are such that they can be pumped readily at both start-up and operating temperatures. The flash points of these oils will not decrease signifcantly in service because of their resistance to thermal cracking at the operating temperatures for which they are recommended. The Sepahan Hararat products are very thermally stable and are capable of an extremely long service life without deposit formation or viscosity increase.
Applications:
- Closed, indirect heating and cooling systems in all kinds of industrial processes
- Petroleum products processing
- Asphalt and cold tar storage, transport and compounding
Features & Benefits
- High heat transfer coeffcients
- High oxidation and thermal stability
- Low vapour pressure
- Non-corrosive
- Non-toxic
packaging
- Drum (208 lit)
storage
- Storing lubricants preferably indoor and if not possible, outdoor under cover away from direct sun light and rain and snow falls will maximize lubricant life time.
- Avoid temperature fluctuations, maintaining storage temperature around 25 C will be of great help to lubricant quality protection
- This product is stable in ambient conditions, non-corrosive and can be stored in mild steel containers
Safety, Health and Environment
This product is stable in ambient conditions and is practically non-irritating to skin and eyes.
Avoid prolonged and repeated skin contact with used lubricants.
In case of skin contact, wash with soap and water
Avoid environmental pollution. Return used lubricants to collection centers.
ISO 6743 : PART 12 B13
Sepahan Hararat Specification |
|||
Result |
Test Method |
Unit |
Property |
32 |
- |
- |
ISO VG |
32 |
ASTM D-445 |
mm2/s (cSt) |
Kinematic viscosity at 40°C |
115 |
ASTM D-2270 |
- |
Viscosity index (VI) |
850 |
ASTM D-4052 |
Kg/m3 |
Density at 15.6 °C |
225 |
ASTM D-92 |
°C |
Flash point |
-9 |
ASTM D-97 |
°C |
Pour point |